Central Scotland Roofline Free quote →
Central Scotland Roofline is a directory. Quotes are provided by our partner network and may not include companies listed on this site.

Fascia, Soffit & Guttering Replacement Costs in Scotland (2026 Price Guide)

Short answer: replacing fascias, soffits and guttering in uPVC on a typical Scottish semi-detached house usually costs about £1,500–£3,000, and about £2,500–£5,000 for a detached house. Labour and access (scaffold or tower) drive the price far more than the materials do.

Search "fascia soffit guttering cost" and almost every price guide you'll find is written for the UK as a whole, usually with London and the South East pulling the averages up. Scotland rarely gets its own numbers, so this guide sets out what roofline work tends to cost across Central Scotland, component by component, and what makes one quote double another.

Why the price depends on labour and access

Roofline work is priced mostly on labour and access, not materials. uPVC board and standard guttering cost roughly the same wherever you buy them. The variable is the installer's day rate and how the crew reaches the roof edge. Day rates in Glasgow, Edinburgh and the smaller Central Scotland towns tend to sit below those in London and the South East, because overheads and demand are lower. That does not make every Scottish job cheap: city-centre work in Edinburgh's New Town or Glasgow's West End, where scaffolding and parking permits add cost, can still land at the top of the range.

Typical prices by component

ItemTypical range
Fascia board (fitted, uPVC)£40–£70 per metre
Soffit board (fitted, uPVC)£35–£60 per metre
Guttering (fitted, uPVC or aluminium)£30–£55 per metre
Cladding£50–£90 per metre
Guttering only, small job£400–£900
Full fascia, soffit & guttering, semi-detached£1,500–£3,000
Full fascia, soffit & guttering, detached£2,500–£5,000

These are indicative guide ranges for straightforward uPVC work, not an average calculated from a survey. Real quotes vary with access, condition and specification. See "About these figures" below.

A worked example: a typical semi-detached house

A typical semi-detached house has roughly 12–14 metres of eaves in total (the front and back roof edges), each needing a fascia, a soffit and a gutter run. Taking 13 metres:

  • Low end: 13 m × (£40 + £35 + £30) = about £1,365
  • High end: 13 m × (£70 + £60 + £55) = about £2,405

That is before scaffolding or a tower, gable-end bargeboards, extra downpipes and any timber repairs, which is how a whole-job price reaches the £1,500–£3,000 band. Count the metres on your own house before you compare quotes: an installer who prices per metre should be able to tell you the length they measured.

What actually moves the price

  • Scaffolding vs a tower. A tenement or three-storey terrace usually needs proper scaffolding, which can add roughly a third to the job. A single-storey semi in Livingston or Cumbernauld often needs only a mobile tower. Scaffolding over a pavement may also need a council permit (see our guide to scaffolding permits for roofline work).
  • Cast iron vs uPVC. Repairing existing cast-iron guttering, common on pre-1919 tenements and villas, is usually cheaper than a full uPVC replacement, but it is skilled work and not every installer quotes for it. Ask specifically, and see repair vs replace for cast iron.
  • Material grade. Standard white uPVC is cheapest. Woodgrain-effect or coloured uPVC, often needed to match a conservation area, commonly adds 10–20%.
  • Number of downpipes. Older properties are frequently under-piped for modern rainfall volumes, and adding a downpipe to stop overflow is a common extra.
  • Height and roof shape. Dormers, bays, hipped roofs and long gable runs add metres and awkward cuts.

Extras that turn up mid-job

Most surprises on a roofline job appear once the old boards come off. Ask each installer how they price these before work starts, not after:

  • Rotten timber behind the fascia. Wet rafter ends or wall plates may need repair. A carpenter's day rate on top of the quote is common when this is found.
  • Eaves ventilation. Modern soffits should include ventilation. If your loft suffers condensation, our guide to roofline ventilation explains what to ask for.
  • Asbestos. Some soffit and fascia boards fitted in older houses (broadly, before asbestos was banned in the UK in 1999) contained asbestos cement. If your boards are old, ask a qualified surveyor to identify them before anyone drills, cuts or breaks them. Removal by a licensed or competent contractor costs more than standard disposal.
  • Disposal, bird guards and VAT. Check that waste removal is included, whether eaves bird guards are extra, and whether the quoted price includes VAT.

Repair or replace?

A section of broken guttering or a few loose fascia boards can often be repaired for a fraction of a full replacement. Replacement makes more sense when boards are rotten along most of a run, when guttering leaks at many joints, or when you are already paying for scaffolding for other roof work: replacing everything in one visit avoids paying for access twice.

How to compare quotes properly

A quote that is dramatically below these ranges is usually missing something, often scaffolding, disposal of old materials or soffit ventilation. Ask every installer to itemise the following so you compare like with like:

  • Fascia, soffit and guttering priced separately, with the metres measured
  • Access: scaffold, tower or ladders, and who arranges any council permit
  • Product specification (brand and profile, colour, thickness)
  • Removal and disposal of old materials
  • Guarantee length in writing, and what it covers
  • Payment terms: deposit size, stage payments, VAT
  • Proof of public liability insurance

Our guide to vetting a roofline installer covers the checks to make before you accept anything, and red flags in free quotes lists the warning signs.

When to book

Demand often rises after autumn and winter storms, and lead times can stretch when many households need repairs at once. Planning non-urgent work for drier spring and summer months can give you more choice of installers, though a leaking gutter should not wait for the season.

About these figures

The ranges above are indicative guide prices for common uPVC jobs on ordinary houses. They are not an average calculated from a survey of completed jobs, and they do not include scaffolding, timber repairs, asbestos work or VAT unless stated. Prices change with material costs and local demand, so treat them as a way to spot a quote that looks far too high or far too low, and always get itemised written quotes for your own property.

Get up to 3 free quotes to compare against these ranges

Tell us about your job and we'll pass your request to installers covering Central Scotland.

Get my free quotes →

Frequently asked questions

Is it cheaper to repair guttering than replace it?

Usually yes, especially for cast-iron guttering on period properties, where re-sealing joints and treating rust can cost a fraction of a full uPVC replacement, provided the iron itself hasn't corroded through.

Does scaffolding always add a third to the cost?

Roughly, on multi-storey properties. Single-storey homes often only need a tower or ladders with proper edge protection, which is considerably cheaper.

How many quotes should I get?

Two to three is enough to see where a job sits within typical ranges and spot anything that looks unusually high or suspiciously low.

How much does it cost to replace fascias and soffits on a semi-detached house in Scotland?

As an indicative guide, roughly £1,500 to £3,000 for a full uPVC fascia, soffit and guttering replacement on a typical semi-detached house, before scaffolding surprises, timber repairs or asbestos work. Get itemised written quotes for your own property.

Is VAT included in roofline quotes?

Not always. Ask each installer to state whether the price includes VAT, and compare quotes on the same basis.

Could my old soffits contain asbestos?

Boards fitted before asbestos was banned in the UK in 1999 may contain asbestos cement. Have a qualified surveyor identify them before anyone cuts, drills or breaks them, and use a competent contractor for removal.