Cladding Cost Guide for Scottish Homes (Timber, uPVC & Composite)
By Central Scotland Roofline · Published 12/09/2026 · Updated 22/09/2026 · 8 min read
Cladding gets far less coverage than fascia, soffit and guttering, but it's a common add-on quote across Central Scotland – usually to cover exposed gable ends, dormer cheeks, or to modernise a tired elevation without a full render job. Here is what it actually costs in 2026, which material suits which situation, and the parts of a Scottish quote most homeowners never think to check.
Typical fitted costs by material (2026)
| Material | Typical fitted cost | Best suited to |
|---|---|---|
| uPVC shiplap | £80–£150 per m² | Gable ends, dormers, budget-conscious jobs |
| Softwood or hardwood timber | £90–£180 per m² plus ongoing treatment | Conservation areas, period properties, self-build |
| Composite (wood-effect) | £120–£220 per m² | Visible elevations where appearance matters |
| Fibre cement board | £110–£200 per m² | Coastal or highly exposed sites |
| Aluminium (planks or panels) | £140–£240 per m² | Contemporary self-builds, exposed coastal elevations |
These ranges assume safe access from tower or scaffold, standard preparation and typical Central Scotland labour rates. Awkward access, wall repair work and specification changes push costs up. Get itemised written quotes for your own property.
Where cladding sits in a typical roofline job
Most cladding quotes in Central Scotland are not full-house recladding. They are targeted areas fitted alongside a fascia, soffit and guttering replacement, most commonly:
- Gable-end apex on a dormer bungalow, where the triangle above the roofline is otherwise bare render or exposed timber
- Dormer window cheeks, extremely common on Scottish 1930s and 1960s loft conversions
- Covering an old, failing render finish without the cost of full re-rendering
- Matching the fascia and soffit finish visually across the whole roofline in a like-for-like replacement
- Weathering a gable exposed by a demolished lean-to or extension
Where you are already paying for scaffolding to work at eaves height, adding a small cladding area sits in the same access cost and typically costs less per m² than the same panels quoted on their own. See the wider fascia, soffit and guttering costs guide for how the components combine on a full quote.
Why Scotland's weather changes the calculation
Product life on a manufacturer's leaflet assumes an average UK climate. Central Scotland's frequent wind-driven rain, freeze-thaw cycles and, on the west and coasts, salt-laden air, are harder on every cladding material than the leaflet suggests. Three concrete effects:
- Timber greying and rot. Untreated softwood cladding on a west-facing Scottish elevation can grey visibly in one season, and start showing rot at cut ends within 8–10 years without a maintenance regime. Even preservative-treated softwood needs re-treating every 4–6 years to hold its appearance and integrity.
- uPVC and freeze-thaw. Standing water at joints and around fixings freezes overnight in a Central Scotland winter more often than in most of England. Cheaper uPVC shiplap with under-specified fixings can loosen faster than the board itself fails.
- Salt corrosion at fixings. Fife's East Neuk, the Ayrshire coast and Argyll all see enough sea-driven salt to corrode standard galvanised fixings within a few years. See the coastal Fife salt-air guide for the same problem on guttering. In these locations, A2 or A4 stainless steel fixings are worth specifying regardless of the board material.
In exposed or coastal locations, fibre cement or good-quality composite tends to outlast both uPVC and timber, which is why it costs more upfront but often works out cheaper across a 25-year ownership window.
Warm cladding vs cold cladding
Most residential cladding in Central Scotland is fitted "cold" – boards on battens over the existing wall, with a breather membrane behind. That is what the price ranges above assume. Cladding fitted as external wall insulation (EWI) is a different job: rigid insulation board is fixed to the wall first, then a render or rainscreen cladding is applied on top. EWI on a semi-detached house typically starts around £180–£250 per m² and can materially improve energy performance, sometimes bringing a property into scope for schemes like Warmer Homes Scotland.
If your cladding installer does not mention insulation and your walls are solid stone or uninsulated cavity, ask specifically whether combining the work makes sense before committing to a cold-cladding specification you will regret if you later want EWI.
Preparation and battens: the invisible half of the job
A cladding quote priced only on the visible boards is incomplete. A proper Scottish installation includes:
- Removal and disposal of existing render, timber or old cladding, including asbestos assessment on pre-1999 boards (see our note on asbestos and roofline work).
- Substrate repair – sound blockwork, timber-frame sheathing, or masonry pointing. Boards fixed over a soft or crumbling substrate will fail regardless of the board specification.
- Breather membrane to the outer face of the wall, taped at joints, allowing vapour to escape while shedding wind-driven rain.
- Treated softwood or aluminium battens at appropriate centres for the chosen board. Stainless or hot-dip galvanised fixings in exposed locations.
- Insect and rodent mesh at the bottom of the cavity behind the cladding, closing off nesting sites without blocking ventilation. Relevant if you have had issues with birds nesting in the roofline.
- Flashings, trims and corner detail to shed water at every horizontal and vertical junction.
Two quotes at very different prices for what looks like the same cladding job are usually differ on the invisible half, not the boards themselves.
Planning, listed buildings and conservation areas
Cladding a street-facing elevation on a listed building or inside a conservation area is treated the same way as fascia and guttering changes – it can need consent, particularly if it materially changes the appearance of the building. Check with your local council before committing to a material choice if your property falls into either category, and read the listed building consent guide for the process.
A building warrant is separately required if the cladding forms part of the external envelope's thermal performance (typically EWI), or if the installation involves alterations to the external wall structure. Like-for-like cold cladding on a modern house usually falls outside warrant scope, but confirm with your council's building standards team – see the Scottish building warrant guide.
VAT on cladding work
Cladding on an occupied home is standard-rated at 20 percent VAT. Two situations shift the rate:
- New build. Cladding fitted as part of a qualifying new-build dwelling is zero-rated.
- Empty homes. A property that has been empty for two years or more and is being brought back into use can qualify for a 5 percent reduced rate on the labour and materials, including cladding.
See the full VAT on roofline work in Scotland guide for the exact rules and how to spot a mis-rated quote. Ask each installer whether their price includes VAT and at what rate.
Getting quotes: what to include on the specification
A quote you can properly compare across installers should state:
- Board manufacturer, product name, thickness and colour/finish reference
- Fixing material (typically A2 stainless in inland Central Scotland, A4 stainless within 5 km of the coast)
- Batten specification and centres, plus breather membrane brand
- Access method (scaffold, tower, ladder) and whether council permits are needed – see scaffolding permit guide
- Written manufacturer product guarantee (typically 10–30 years) and separate installer workmanship guarantee
- VAT rate applied and whether the price is inclusive
- Waste disposal, asbestos handling if applicable, and reinstatement of any adjacent finishes
Doorstep offers of "we're doing a job nearby, we can do yours cheap this week" for cladding are a well-known cold-call pattern – see roofline quote red flags for what to walk away from, and your 14-day cancellation rights if you already signed.
Frequently asked questions
Is timber cladding worth the extra maintenance in Scotland?
Mainly on conservation areas and period properties where it is required, or where the original look genuinely matters to you. On a standard modern gable, composite gives a similar appearance with substantially less upkeep over a 20-year period.
Does cladding need planning permission in Scotland?
Usually not on a standard modern home under permitted development, but it can on the street-facing elevation of a listed building, in a conservation area, or if it materially changes the building's appearance. Check with your local council's planning department before ordering material.
What is the best cladding for a coastal property in Scotland?
Fibre cement or good-quality composite tends to outlast uPVC and timber in fully exposed coastal locations, and A4 stainless steel fixings should be specified regardless of the board choice.
Can cladding be fitted straight over existing render?
Sometimes, if the render is sound and battens can be fixed securely through it into the underlying wall. On failing or hollow-sounding render, removing it first is usually cheaper than dealing with cladding failure later.
How long does a cladding installation take?
A single gable end on a semi-detached house typically takes 2–4 days including scaffold up and strike. Full-house cold cladding on a detached home runs to 2–3 weeks. EWI with a rendered finish adds a further week or more for curing.
Comparing cladding options for your property?
Get up to 3 free quotes and see real pricing for your specific job.
Get my free quotes →Frequently asked questions
Is timber cladding worth the extra maintenance in Scotland?
Mainly on conservation areas and period properties where it is required, or where the original look genuinely matters. On a standard modern gable, composite gives a similar appearance with substantially less upkeep over 20 years.
Does cladding need planning permission in Scotland?
Usually not on a standard modern home under permitted development, but it can on the street-facing elevation of a listed building, in a conservation area, or if it materially changes appearance. Check with your council's planning department.
What is the best cladding for a coastal Scottish property?
Fibre cement or good-quality composite tends to outlast uPVC and timber in fully exposed coastal locations, and A4 stainless steel fixings should be specified regardless of board choice.
Can cladding be fitted straight over existing render?
Sometimes, if the render is sound and battens can be fixed securely through it. On failing or hollow-sounding render, removing it first is usually cheaper than dealing with cladding failure later.
How long does a cladding installation take?
A single gable end on a semi-detached typically takes 2 to 4 days including scaffold. Full-house cold cladding on a detached home runs to 2 to 3 weeks. EWI with a rendered finish adds a further week or more.